Latest News
- Chrysler Pacifica Marks Seven Years As Most Awarded Minivan With New Campaign
- Nissan Magnite Achieves 1 Lakh Unit Sales Milestone: Consistency Helps
- Log9 Unveils Amphion & Nexmile – Revolutionizing EV Asset Management
- 2025 Cayenne GTS Unveiled: V8 Power And Advanced Dynamics In New Porsche Models
- Vanessa Williams Moderates Panel To Support Parkinson’s Awareness With Drive Toward A Cure
- India's Car Exports Surge In 2023-24: Maruti Suzuki Leads The Way
- 2024 Isuzu D-Max V-Cross Facelift: What To Expect From The Latest Updates
- Suzuki Access Electric To Electrify The Indian Scooter Market By 2024
- Bajaj Pulsar 400 Teaser Out – Launch Date & Other Details
- Tata Motors Rolls Out New Bi-Fuel Tata Magic Van, Aiming At Eco-Friendly Transportation
The Rim Reality: Advantages And Disadvantages Of Alloy Wheels
There's something really attractive about your neighbour's car, but you can't put your finger on it. You look harder, and realise that the wheels on his car are really attractive and lend the car improved visual impact and character. That's because he's probably had alloy wheels fitted to his car.
I need to get me a set too, you think to yourself. But is there anything you need to know before spending the usually formidable sums of money to have them installed? We answer these questions and more in this important story.
The story continues in the next section. Click through the slides for more:
The story continues in the next slide.
About
Alloy wheels, or ‘mag wheels', are made of an alloy of aluminium or magnesium or sometimes both as well. These wheels were traditionally available only on high-end sports cars and luxury vehicles, but over the last two decades or so, have trickled all the way down to even budget cars.
About
Most alloy wheels are cast aluminium alloys, but some are forged from magnesium alloys as well, which gives them greater strength and ductility. Traditionally, however, car wheels have been made from steel because of its strength, durability and an appearance that was earlier perceived as decent. However, demands of motorsport saw alloy wheels increasingly adopted for their several benefits, and saw steadily appreciating demand from the commercial market as well.
Advantages
1. Better looks
Steel wheels can never look as good as alloy wheels, and the cosmetic upgrade and improved visual impact are the major reasons why so many car owners opt for them. Check out the blacked-out rims on the adjoining Porsche Cayman, it's very easy to see why so many fall for alloys.
Advantages
2. Better heat conduction/dissipation
Since alloys are able to dissipate heat better than steel wheels, they provide better braking performance and decrease the risk of brake failure.
Advantages
3. Better performance
Alloy wheels decrease unsprung weight and therefore transmit less inertia to the springs, thus allowing the suspension to follow the terrain more easily, thereby providing better grip. In addition, handling, steering and cornering see a marked improvement.
Advantages
4. Better fuel economy
Because alloy wheels are lighter than steel wheels, fuel efficiency is increased to a certain extent.
Advantages
5. Better braking
This is because there is better traction during braking since wheel hop is reduced with alloy wheels.
Advantages
6. Less likely to corrode and rust
Since alloy wheels are usually made of aluminium alloy, there are far better protected against corrosion and rust.
Advantages
7. Lengthens tyre life
Since alloy wheels dissipate heat better, tyres wear out less quickly since they remain cooler.
8. Well-suited to tubeless tyres
Alloy wheels are completely airtight and therefore are the perfect foil for tubeless tyres, unlike steel wheels, where one experiences minute losses of tyre pressure.
Disadvantages
1. Not as high-strength as steel wheels
Steel wheels are significantly stronger than alloy wheels and are able to take much more impact before bending or even cracking, like alloy wheels can when subjected to a harsh undulation in the road surface. This is why you should think very carefully before having alloy wheels fitted to your car, especially in our country where bad roads are a part of daily life.
Disadvantages
2. More expensive to produce, buy and repair
The manufacturing processes of alloy wheels are more complex than traditional steel wheels. As a result alloy wheels cost a lot more than their steel counterparts, easily up to 75 to 80 percent more. In India, alloys range from about INR 2,500 to INR 50,000 each and more. Steel wheels also cost much less to repair in case of damage.
Disadvantages
3. More attractive to thieves
Since they are far better looking and cost way more than traditional steel wheels, alloys tend to attract attention of the wrong kind. So if you do have mag wheels on your car, make sure you take precautionary measures like getting locking nuts or the like fitted.
Fender ender
While alloy wheels from reputed companies offer significant benefits in terms of your car's appearance and performance, they are still less durable than steel wheels, and you should make sure that your driving is predominantly on decent tarmac surfaces before opting for this upgrade. Because if you do shell out your hard-earned moolah for a set of mags and don't see that unmarked speedbreaker or hidden pothole, tens of thousands of rupees or more can go down the drain in an instant. Then again, if you're careful, the benefits can easily outweigh the disadvantages. It's your choice.