Step-by-Step Guide: How To Change A Motorcycle Chain 

Changing a motorcycle chain is an essential maintenance task that every rider should know how to do. By regularly replacing worn-out chains, you can ensure optimal performance and safety on the roads.

Gather Tools: Before starting the chain replacement process, gather all the required tools including a socket wrench, Allen keys, chain breaker tool, lubricant spray, and a new chain of suitable length for your motorcycle model.

Preparation: Park your motorcycle on a flat surface before starting. Put on protective gloves and eyewear for safety. You may also want to place some cardboard or a mat under the bike to catch any dirt or oil that may drip during the process.

Loosen Rear Wheel Axle Nut: Using an appropriate socket wrench or spanner, loosen the rear wheel axle nut but don't remove it completely just yet. This will allow you to adjust the tension in later steps.

Adjust Chain Tension: Locate the chain adjusters at both ends of your swingarm. Use an Allen key to turn them simultaneously clockwise or counterclockwise to adjust the chain tension. Refer to your motorcycle's manual for the specific tension measurement.

Remove Old Chain: Position the chain breaker tool over one of the chain links and tighten it until it pushes out a pin, allowing you to separate the old chain. Carefully remove the old chain from both sprockets.

Install New Chain: Take your new motorcycle chain and thread it onto both sprockets, ensuring that it is properly aligned. Use a master link or rivet-type connecting link (depending on your chain) to join both ends together securely.

Adjust Chain Tension Again: With the new chain in place, use the Allen key to adjust the tension once more by turning both adjusters evenly. Check your motorcycle's manual for recommended slack measurements.

Lubricate the New Chain: Apply a suitable lubricant spray specifically designed for motorcycle chains onto your newly installed chain. Ensure that all areas are adequately covered for optimal performance and longevity.

Tighten Rear Wheel Axle Nut: With the chain properly tensioned and lubricated, tighten the rear wheel axle nut securely using a socket wrench or spanner. Double-check that everything is in place before proceeding to the final step.

Test and Final Check: Before hitting the road, perform a test ride to ensure smooth operation of your new motorcycle chain. Additionally, inspect all connections, sprockets, and tension once again for any abnormalities.

DriveSpark Thinks

Maintaining a bike chain is crucial as it ensures the longevity of your motorcycle and safety while riding. Also, having a well-lubed chain will provide a smooth and stress-free ride with less strain on the motorcycle.